Welcome, Guest. Please login or register.

Login with username, password and session length

 
Advanced search

1069494 Posts in 70967 Topics- by 18768 Members - Latest Member: smurfdad
Jump to:  
Pages: [1] 2  All   Go Down
Print
Author Topic: Re-plating a mouthpiece  (Read 1217 times)
0 Members and 1 Guest are viewing this topic.
crazytrombonist505
*
Offline Offline

Location: West Chester, PA
Joined: Oct 13, 2016
Posts: 163

View Profile
« on: May 04, 2017, 12:34PM »

Hello all,
I have this Schilke 59 mouthpiece that I use on my bass trombone that I really, really like. However, the plating is starting to come off around the rim. I've heard that it is bad to let the brass/lead touch your face, so I went to my local music store (Taylor's Music in West Chester) and asked how much it would be to get it re plated. They said that they would have to send it out because they didn't do it there at the store. They said it would be $100 or less.

So, my question is can I send it to some place that can re-plate it, and have it done for around $50? If so, where?

Thanks in advance,

Zach
Logged
crazytrombonist505
*
Offline Offline

Location: West Chester, PA
Joined: Oct 13, 2016
Posts: 163

View Profile
« Reply #1 on: May 04, 2017, 12:42PM »

I should say that I don't want it gold plated, just silver plated.

Thanks!
Logged
greenbean
*
Offline Offline

Location: San Francisco
Joined: Dec 26, 2012
Posts: 1470
"Brass Kahuna"


View Profile
« Reply #2 on: May 04, 2017, 12:52PM »

I would sent it to Stork.  $40 (as of 2 years ago)  High quality plating.
Logged

--Bach 50B (1966)
BGuttman
Mad Chemist

*
*
Offline Offline

Location: Londonderry, NH, USA
Joined: Dec 12, 2000
Posts: 50210
"Almost Professional"


View Profile
« Reply #3 on: May 04, 2017, 12:55PM »

For $100 you could buy another mouthpiece.

I believe Doug Elliott does his own plating.  I would get in touch with him.  Stork is another good option.

Lots of techs send to Anderson Plating.  The plating is excellent, but they only do large batches and your mouthpiece may sit and wait for a long time until they accumulate a plating load (or you may get lucky and be the one that completes the batch).

What I've done as a temporary measure is to put a thin layer of clear nail polish on the rim.  It will protect you from the brass (in case you have a brass allergy).  It won't last forever, but it's easy to replace.
Logged

Bruce Guttman
Solo Trombone, Hollis Town Band
Section Ldr, Merrimack Valley Philharmonic Orch.
crazytrombonist505
*
Offline Offline

Location: West Chester, PA
Joined: Oct 13, 2016
Posts: 163

View Profile
« Reply #4 on: May 04, 2017, 12:58PM »

For $100 you could buy another mouthpiece.

Exactly! I believe the Schilke 59 is like $75 new. That's why I don't want to spend $100.
Logged
crazytrombonist505
*
Offline Offline

Location: West Chester, PA
Joined: Oct 13, 2016
Posts: 163

View Profile
« Reply #5 on: May 04, 2017, 12:59PM »

Thanks for the feedback so far guys! I'll take a look at the various options you mentioned.

Zach
Logged
BGuttman
Mad Chemist

*
*
Offline Offline

Location: Londonderry, NH, USA
Joined: Dec 12, 2000
Posts: 50210
"Almost Professional"


View Profile
« Reply #6 on: May 04, 2017, 01:03PM »

Do you have something else to play while you wait for your mouthpiece to be plated?  It will take several days to a week with normal turnaround (and longer if you aren't lucky with Anderson).  It may be the better part of prudence to get a spare.  If you were closer I'd loan you mine (don't plan to sell) but maybe somebody near you has another Schilke 59 for you to use while you wait.
Logged

Bruce Guttman
Solo Trombone, Hollis Town Band
Section Ldr, Merrimack Valley Philharmonic Orch.
Matt K

*
*
Offline Offline

Location:
Joined: May 6, 2010
Posts: 6792

View Profile
« Reply #7 on: May 04, 2017, 01:07PM »

Doug has done several for me over the years. One is actually in the mail heading to me as I type this.  Quality is superb and the price is very reasonable, but I wont' give an exact figure because most of my replating has been in the context of threading. However, I will say the cost to thread + plate is still south of your $100 estimate and the threading process (done properly) is fairly time consuming.  I'd suspect a pure plate job would be closer to the $40 someone gave for stork than the $100 figure.
Logged

What's in a name? that which we call a tenor-bass posaune
By any other name would smell as sweet;
Full Pedal Trombonist

*
Offline Offline

Location:
Joined: Jun 16, 2009
Posts: 2816

View Profile
« Reply #8 on: May 04, 2017, 02:11PM »

I believe the trick with replating is that when the piece is polished and prepared for plating it could change the shape noticeably. I've only had two mouthpieces replated and then only the rims. And the silver plating was near perfect to start with. Doug Elliott did one and before that Gold Chops did the other.

I believe silver will be much more affordable than the $100 that was quoted to you.

The cheapest option is to do nothing. My very first mouthpiece is nearly all brass on the rim and I still play it from time to time just because and I'm in the process of reshaping a rim. I've been grinding and polishing and then playing the raw brass rim all this past week and no ill reactions.
Logged

We don't just embrace insanity here, we feel it up, french kiss it and then buy it a drink.
Posaunus
*
Offline Offline

Location: California
Joined: Feb 20, 2014
Posts: 603

View Profile
« Reply #9 on: May 04, 2017, 04:29PM »

New and shiny:

http://www.wwbw.com/Schilke-Standard-Large-Shank-Trombone-Mouthpiece-in-Silver-475216.wwbw?source=TWWR5J1BB&cntry=us&currency=usd&gclid=CLiDrc2x19MCFdq2wAodHrwHBw#

$74 including free shipping from Woodwind & Brasswind. 
Logged
crazytrombonist505
*
Offline Offline

Location: West Chester, PA
Joined: Oct 13, 2016
Posts: 163

View Profile
« Reply #10 on: May 05, 2017, 04:14AM »

Do you have something else to play while you wait for your mouthpiece to be plated?  It will take several days to a week with normal turnaround (and longer if you aren't lucky with Anderson).  It may be the better part of prudence to get a spare.  If you were closer I'd loan you mine (don't plan to sell) but maybe somebody near you has another Schilke 59 for you to use while you wait.

Bruce,
Thank you for your offer. However, I dont play bass trombone very much at all. Unless something unexpected comes up, it should be no problem for me to have it gone for a few weeks. I can always use my good old 1 1/2G  :D

Zach
Logged
Doug Elliott
Lord of the Rims

*
*
Online Online

Location: Silver Spring, MD
Joined: Mar 12, 2005
Posts: 6430

View Profile
« Reply #11 on: May 05, 2017, 05:41AM »

I can do refinish jobs for $50.  It has been $40 but plating costs have gone up again.
Logged

www.DougElliottMouthpieces.com
XT LexanN104,C+,D2, Williams 6, K&H Slokar alto, K&H Slokar Solo .547 open wrap
wgwbassbone
*
Offline Offline

Location: West Hartford, CT
Joined: Jan 19, 2007
Posts: 1724

View Profile
« Reply #12 on: May 05, 2017, 06:26AM »

Doug's plating is top notch!
Logged

Holton TR 180 MV 1 and 1/2G
crazytrombonist505
*
Offline Offline

Location: West Chester, PA
Joined: Oct 13, 2016
Posts: 163

View Profile
« Reply #13 on: May 05, 2017, 10:53AM »

Thanks for all the excellent responses! I have contacted Stork and am awaiting their response.

Zach
Logged
crazytrombonist505
*
Offline Offline

Location: West Chester, PA
Joined: Oct 13, 2016
Posts: 163

View Profile
« Reply #14 on: May 05, 2017, 10:54AM »


That is tempting! But I got my Schilke 59 for a good price used, so putting $40 into isn't a big deal.

Logged
wgwbassbone
*
Offline Offline

Location: West Hartford, CT
Joined: Jan 19, 2007
Posts: 1724

View Profile
« Reply #15 on: May 05, 2017, 03:19PM »

Thanks for all the excellent responses! I have contacted Stork and am awaiting their response.

Zach
Just spoke with John two days ago. He's not taking new work until middle of June. His moms 100th birthday is coming up. And he's traveling to Spokane.
Logged

Holton TR 180 MV 1 and 1/2G
crazytrombonist505
*
Offline Offline

Location: West Chester, PA
Joined: Oct 13, 2016
Posts: 163

View Profile
« Reply #16 on: May 06, 2017, 11:32AM »

Just spoke with John two days ago. He's not taking new work until middle of June. His moms 100th birthday is coming up. And he's traveling to Spokane.

Bill, thank you for telling me! I was wondering why I didn't receive a response. Now I know.

Zach
Logged
wgwbassbone
*
Offline Offline

Location: West Hartford, CT
Joined: Jan 19, 2007
Posts: 1724

View Profile
« Reply #17 on: May 07, 2017, 06:43AM »

I would just ask Doug Elliott. He quoted a good price and I'm sure he can get it done in a reasonable amount of time.
Logged

Holton TR 180 MV 1 and 1/2G
crazytrombonist505
*
Offline Offline

Location: West Chester, PA
Joined: Oct 13, 2016
Posts: 163

View Profile
« Reply #18 on: May 15, 2017, 08:27AM »

I would just ask Doug Elliott. He quoted a good price and I'm sure he can get it done in a reasonable amount of time.

I just contacted him about it, awaiting a response.

Thanks
Logged
jbeckett

*
Offline Offline

Location: Virginia Beach, VA
Joined: Dec 23, 2010
Posts: 211
"."


View Profile
« Reply #19 on: May 17, 2017, 06:03PM »

Gold chops dot com. Great plating and turn around within a week. $45.
Logged

the most pure sound... go for that. The 24 carat sound...

                        Jay Friedman
Pages: [1] 2  All   Go Up
Print
Jump to: